Oceanic ATOM 2.0 Manuale Utente

Depressing and holding the S button for 2 seconds while

viewing the NORM Surface screen will activate the

ATOM's Receiver and access a series of screens that will

indicate the Status of the system's Batteries and Pressures of

the Tanks in use. Transmitter Battery Status is not displayed

for TMT 2 and 3 if TMT 2-3 USE is set for BUD (Buddy

Check).

If a Transmitter is not active and linked to the ATOM, the

message NotAvAil (Not Available) will appear.

Each screen will be displayed for 3 seconds. ATOM

Battery Status, then Transmitter 1 Battery Status and Tank

Pressure, then Transmitter 2 Battery Status and Tank

Pressure, then Transmitter 3 Battery Status and Tank

Pressure.

The screen will then revert to NORM SURF MAIN Display.

ATOM BATTERY STATUS, information includes (Fig. 36/37):

> Graphics ATOM and bAt

> Graphic Good or Lo

> Battery icon, if a Low Battery Warning Condition exists.

Flashing if an Alarm Condition exists.

Transmitters (referred to as TMTs) that are active and Linked will

transmit signals conveying Tank Pressure and Battery Status for

display on the Status screens. If a TMT is not active or active but

not Linked, the Status screen(s) will display Not Available.

Fig. 36 - ATOM BATT GOOD

Fig. 37 - ATOM BATT LOW