Q-Logic 2500 Manuale Utente
5–Fibre Channel Noninteractive Commands
Host Configuration (Command Line Option -z)
Host Configuration (Command Line Option -z)
5-2
SN0054667-00 C
List of adapters: adapter model, port number, WWPN, serial number (SN),
adapter number (adapter 0–n), and status (online or offline)
adapter number (adapter 0–n), and status (online or offline)
Total number of QLogic Fibre Channel adapters detected
Host Configuration
(Command Line Option -z)
The command line option -z provides a summary for the selected adapter in a
single command. The command format is:
# qaucli -pr fc -z
QConvergeConsole CLI shows the information in
, as well as the following additional information:
Adapter general information
Adapter vital product data (VPD)
Adapter parameter settings
Driver settings information:
Group: persistent
Group: binding
Device/LUN Information
Selective LUNs Information
Boot device settings
To show the information for a single adapter, issue the following command:
# qaucli -pr fc -z (<hba instance> | <hba wwpn>)
Where:
To show the information for all adapters, issue the following command:
# qaucli -pr fc -z all
NOTE:
The failover and SAN device management APIs are QLogic-specific libraries
required for QConvergeConsole CLI. The versions of these libraries are
useful for debugging purposes.
required for QConvergeConsole CLI. The versions of these libraries are
useful for debugging purposes.
hba instance = Adapter number (use -g command to find)
hba wwpn = World wide port name of the adapter