Novell ZENworks Endpoint Security Management 3.5 Manuale Utente
ZENworks® ESM 3.5
Administrator’s Manual
94
Global Communication Hardware Control
This component sets the policy defaults for all communication hardware. To access this control,
open the Global Policy Settings tab and click the Comm Hardware icon in the policy tree on the
left.
open the Global Policy Settings tab and click the Comm Hardware icon in the policy tree on the
left.
Figure 72 : Global Communication Hardware Control
The following communication hardware types may have their default set as either enable or
disable for each type:
disable for each type:
•
IrDA® (Infrared Data Association) - controls the infrared access port on the endpoint
•
Bluetooth® - controls the Bluetooth® access port on the endpoint
•
1394 (FireWire™) - controls the FireWire™ access port on the endpoint
•
Serial/Parallel - controls serial and parallel port access on the endpoint
Enable allows complete access to the communication port. Disable denies all access to the
communication port. The driver-level communication hardware on the endpoint (NIC, modem,
and Wi-Fi [card or radio]) are controlled by location, and do not have a global default. See
“Communication Hardware Settings” on page 110 for more details.
communication port. The driver-level communication hardware on the endpoint (NIC, modem,
and Wi-Fi [card or radio]) are controlled by location, and do not have a global default. See
“Communication Hardware Settings” on page 110 for more details.