North Star M268180M Manuale Utente
Machine Components
15
1.) Batte ry Clamps. Use the battery clamps to connect the battery power cord to the battery.
2.) Batte ry Powe r Cord. The battery power cord connects the vehicle battery to the remote switch. T his
2.) Batte ry Powe r Cord. The battery power cord connects the vehicle battery to the remote switch. T his
cord remains connected to the battery when the sprayer is not in use.
3.) Remote Switch. The remote switch allows the operator to safely turn ON/OFF the sprayer.
4.) Pump Powe r Cord. The pump power cord connects the remote switch to the pump.
5.) Gun Hose . The 420” gun hose transfers chemical from the pump to the spray gun.
6.) Spraye r Tank. The sprayer tank holds the chemical.
7.) Fill Cap. T he fill cap has a ball check to allow air to enter the tank as the chemical is dispensed, but
4.) Pump Powe r Cord. The pump power cord connects the remote switch to the pump.
5.) Gun Hose . The 420” gun hose transfers chemical from the pump to the spray gun.
6.) Spraye r Tank. The sprayer tank holds the chemical.
7.) Fill Cap. T he fill cap has a ball check to allow air to enter the tank as the chemical is dispensed, but
does not allow chemical to escape the tank.
8.) Spraye r Pump. The sprayer pump makes the chemical flow to the spray gun and the nozzle.
9.) Pre ssure Gauge . T he pressure gauge is an indicator of the pressure in the system.
9.) Pre ssure Gauge . T he pressure gauge is an indicator of the pressure in the system.
10.) Pre ssure Adjustment Knob. T urn the pressure adjustment knob until the sprayer is running at the
desired pressure.
11.) Priming Hose. The priming hose transfers chemicals from the pump back to the tank while priming.
12.) Suction Tube. The suction tube is the inlet line for the pump. The suction tube has a suction strainer
12.) Suction Tube. The suction tube is the inlet line for the pump. The suction tube has a suction strainer
to prevent debris from entering the pump.
13.) Priming Valve . T he priming valve performs three functions. First, it allows the pump to prime itself
when open. Second, it helps keep the chemical well circulated when the valve is left open. Third, it will
relieve the system pressure by opening the valve.
relieve the system pressure by opening the valve.
14.) Bypass Hose . The bypass hose transfers liquid from the pump to the tank when the system is up to
pressure.
15.) Agitation Hose . The agitation hose combines the bypass and priming hose to send the liquid back to
the tank to keep the chemical mixed.
16.) Spray Gun. The spray gun has three spraying modes; stream, cone, fog (see operation instructions).
17.) Gun Clips. Use the gun clips to store the spray gun.
17.) Gun Clips. Use the gun clips to store the spray gun.
18.)
Hose W rap. The hose wrap is built into the tank, and provides a storage location for the gun hose.