North Star M268180M Manuale Utente
Operation - Using the Sprayer (continued)
26
0154 2
Priming valve
Pressure adjustment knob
7. Adjust pressure
and agitation as
nee de d
nee de d
-Rotate the pressure adjustment knob until the spraye r is running at the
desire d pressure .
-O pen priming valve to circulate flow back to the tank and create agitation.
O pen until desire d amount of agitation is achie ve d.
8. Le aving
unattende d
If the spraye r must be left unattende d at any time :
a) Disconnect power to the sprayer.
b) Relieve system pressure by depressing the gun trigger.
c) T urn off the vehicle. Set brake or block the wheels.
b) Relieve system pressure by depressing the gun trigger.
c) T urn off the vehicle. Set brake or block the wheels.
9. Discontinue use if
clogge d or
inope rative
inope rative
If the spraye r be come s clogge d or inope rative during use, discontinue use
immediately.
immediately.
- DO NOT attempt to service while chemicals are in the sprayer and power is
connected.
- Return to service area to review instructions for troubleshooting before
attempting to service.
Note: A reserve, clean container capable of holding at least 16 gallons should be kept for use when
the sprayer tank needs to be em ptied temporarily for repairs. It is advisable to purchase a
reserve tank suitable for pesticide storage from Northern Tool and Equipment for use in these
circum stances. The container should be properly labeled as to its contents if it is used.
reserve tank suitable for pesticide storage from Northern Tool and Equipment for use in these
circum stances. The container should be properly labeled as to its contents if it is used.