North Star MTBSL Manuale Utente

Assembly (continued)

Step Seven: Attach gun hose to spr ay gun and pump

1. Attach one end of gun hose to the pump hose barb. Follow hose clamp installation instructions.
2. Attach the other end of gun hose to the spray gun. Follow hose clamp installation instructions.

Step Eight: Attach hose guide to tank

Route gun hose around sprayer and through hose guide, then attach hose guide to tank with (1)

5/16 x ½” flange bolt.

Step Nine: Attach gun cli ps to tank

Fasten the gun clips to the sprayer tank with (2) #10 x ¼” screws.

Step Ten: Attach drain c ap to tank

Press the rubber washer into the drain cap, then thread the drain cap onto the tank.

Hose clamp

Gun hose

Hose clamp

Pump hose barb

Spray gun

5/16 x ½”

Flange bolt

Hose guide

Hose clamp installation instructions
1. Slide hose clamp over the end of

the hose

2. P ush the hose onto the hose barb
3. Slide the hose clamp over the hose

barb

4. Tighten the hose clamp

#10 x ¼” screw

Gun clip

Rubber washer

Drain cap