Nlynx MinIT6000 Manuale Utente

3. In 

the 

Port box, type in the proxy servers port address if it is different than 1080 

(default). 

4. Click 

OK to save the changes. 

Note:  If you configure a default SOCKS proxy, you must specify at least one server 
in the Server Location tab for server and published application browsing to work.

  

1.  Click on the Proxy pull-down list and select SOCKS. 

2.  In the Proxy address box, type in the proxy server's IP address or DNS name. 

3.  In the Port box, type in the proxy servers port address if it is different than 1080 (default). 

4.  Click OK to save the changes. 

1.  From the "Connection Manager" window, select the ICA client connection you 

want to change. 

2.  Click on the Edit button to bring up the "Edit Connections" window. 

3.  Click on the Firewall Settings tab. 

4.  Follow the instructions for the procedure above beginning with Step 1. 

If the ICA Client is outside a firewall that uses address remapping, you must configure the 
ICA Client to use the alternate address returned by the master ICA Browser. This is 
necessary even if you are not using a SOCKS proxy server. 

Note:  You must also use the ALTADDR utility to manually set the alternate address 
for each Citrix server. See the Command Reference appendix of either the 
MetaFrame Administrator's Guide or the 

System Guide for more 

information.

 

1.  Open the Global ICA Client Settings dialog box. 

2.  Click the Firewall Settings tab. 

3.  Click Use alternate address for firewall connection. 

4.  Click OK to save your changes. 

Note:  If you set alternate address translation for all connection entries, it cannot be 
disabled for specific connection entries.

 

1.  From the "Connection Manager" window, select the ICA client connection you 

want to change. 

2.  Click on the Edit button to bring up the "Edit Connections" window. 

3.  Click the Firewall Settings tab. 

4.  Click Use alternate address for firewall connection. Click OK to save your changes.