Network Technologies Rackmux-D15/17 Manuale Utente

 

 

If the Telco 2-post mounting bracket kit (NTI# RL-T15-TEL) is to be used, secure the short and long brackets to each side of the 
drawer as shown in Fig. 2.    Apply 2 nuts (supplied) per bracket to secure the brackets to the drawer.   Apply two #10-32x3/4” 
screws  (supplied) per bracket to the post at the desired height.    Slots are provided in the brackets to make minor depth 
adjustments easy.    Be sure to properly tighten all nuts and screws before using the drawer.    
 

 

 
The RACKMUX may be connected to either a PS/2 or a USB CPU with a VGA video port.      To connect to a PS/2 CPU,  use a 
VEXT-6-MM cable and VVKINT-6-MM cable as shown in Fig. 3.       To connect to a USB CPU,  use the VEXT-6-MM and USB-
AB-2M cables as shown in Fig. 2.      
 

 
 

 
 
 
 
 
 

NTI