Netcom NB9 Manuale Utente

Management > SNTP

The SNTP option under Management menu configures the NB9/NB9W’s time automatically by synchronizing 
with Internet time servers. 

Tick the corresponding box displayed on the screen. Then click Save/Apply.

Access Control > Services

The Services Option limits or enables selective access via the LAN or WAN via the following services:

Enable the service by checking the corresponding box and clicking SAVE/APPLY. You will note that all services 
are enabled for LAN clients and disabled for WAN clients by default.

EXAMPLE 1:  

You need to access your NB9/NB9W via the Internet from a remote location through a Web 

browser.  Method: enable WAN access for HTTP and click Save and Apply. Then enter the address http://[WAN_
IP_NB9/NB9W] in the browser address bar of the remote machine.

EXAMPLE 2:  

Assume that you already have a web server on your LAN behind the NB9W that people 

connect to from the Internet. You have entered a ‘Port Forwarding’ entry that forwards incoming traffic on the 
WAN on port 80 to the LAN IP of the web server on port 80 (default for HTTP traffic). If you enable HTTP WAN 
access to the NB9/NB9W you will be notified that the default port to access the NB9/NB9W has been updated to 
port 8080. Therefore, your web server will not need to be reconfigured, and you can access your NB9/NB9W on 
the WAN side using address http://WAN_IP_OF_NB9/NB9W:8080. The same applies for other services that use 
conflicting ports setup in your NB9/NB9W.