NEC 2400 PX Manuale Utente
NEAX2400 IPX Feature Programming Manual
NDA-24297, Issue 1
NDA-24297, Issue 1
Page 179
Class Of Service - Individual
C-15
Interactions (cont’d)
2.
CALL FORWARDING [C-2, 3, 5]: Station-to-station calls can be forwarded to a fully restricted station.
An attempt to forward an incoming trunk call to a fully restricted station will result in reorder tone.
An attempt to forward an incoming trunk call to a fully restricted station will result in reorder tone.
3.
STATION HUNTING [S-7, 8, 9]: Any call directed to a busy, fully restricted station will hunt to an
alternate station. Careful consideration is required when assigning a fully restricted station to a hunt group,
since incoming trunk calls directed to a fully restricted station will result in returning reorder tone.
alternate station. Careful consideration is required when assigning a fully restricted station to a hunt group,
since incoming trunk calls directed to a fully restricted station will result in returning reorder tone.
4.
TRUNK ANSWER FROM ANY STATION (TAS) [T-8]: An attempt by a fully restricted station to
answer a call via the TAS feature will result in reorder tone.
answer a call via the TAS feature will result in reorder tone.
The following features interact with inward route restricted stations
1.
THREE-WAY CALLING [T-2]: When a user is restricted from receiving direct calls from a trunk group,
the user cannot be added to an established connection that includes the restricted trunk group.
the user cannot be added to an established connection that includes the restricted trunk group.
2.
CALL FORWARDING [C-2, 3, 5]: Incoming trunk calls cannot be forwarded to an inward route restricted
station.
station.
3.
CALL PICKUP [C-7, 30]: Incoming trunk calls cannot be answered by an inward route restricted station.
4.
ATTENDANT CAMP-ON [A-1]: This feature is denied on calls extended to an inward route restricted
station. Attempts will be routed to reorder tone.
station. Attempts will be routed to reorder tone.
5.
STATION HUNTING [S-7, 8, 9]: Hunting of an incoming trunk call to an inward route restricted station
is not allowed.
is not allowed.
6.
TRUNK ANSWER FROM ANY STATION [T-8]: A user restricted from receiving direct incoming calls
via a given trunk group cannot use the TAS feature to answer calls received via that trunk group.
via a given trunk group cannot use the TAS feature to answer calls received via that trunk group.
7.
NIGHT SERVICE [N-1, 2]: Restrictions can be changed for a given station when the system is switched
to the night mode of operation; therefore, the assignment of an inward route restricted station as a night
station can be allowed (see DAY/NIGHT CLASS OF SERVICE
to the night mode of operation; therefore, the assignment of an inward route restricted station as a night
station can be allowed (see DAY/NIGHT CLASS OF SERVICE
.)
8.
CODE CALLING ACCESS [C-21]/MEET ME PAGING [M-1]: Connection of an inward route restricted
line to an answer-back channel is not denied when the call is an incoming exchange call.
line to an answer-back channel is not denied when the call is an incoming exchange call.
Programming
Day/Night Class
STEP 1:
ASYD
- System Data 1, Index 75. Should the following commands be developed for Day/Night. 0/1:
No/Yes
Note:
DAY/NIGHT CLASS OF SERVICE [D-15]. If Day/Night operation is to remain the same, the following bits
should be assigned as data “0”. Only those restrictions that will change between Day and Night should be
assigned as data “1”. Further assignments MUST be made in the corresponding command.
should be assigned as data “0”. Only those restrictions that will change between Day and Night should be
assigned as data “1”. Further assignments MUST be made in the corresponding command.
Bit 0 - Develop ARSC command for Day/Night?
Bit 1 - Develop ASFC command for Day/Night?
Bit 1 - Develop ASFC command for Day/Night?
Bit 2 - Develop ATNR command for Day/Night?
Bit 3 - Develop ATDP command for Day/Night?
Bit 3 - Develop ATDP command for Day/Night?
Telephone Class
STEP 2:
ASDT
- Assign Tenant No., Station No., LENS, and the TEC to the station. This is used in regular
business systems. Assign the SFC and RSC.
TN:
Tenant Number
STN:
Station Number
LENS: Line Equipment Number (6 digits)