NEC 2400 PX Manuale Utente
NEAX2400 IPX Feature Programming Manual
Page 378
NDA-24297, Issue 1
H-1
Hotline
H-1 Hotline
General Description
This feature permits a pair of station sets to be associated with one another on an automatic ringdown basis.
Operating Procedure
1.
Station A lifts the handset.
2.
Station B is rung.
3.
Station B lifts the handset; the conversation proceeds.
Service Conditions
1.
If both phones in a hotline pair are equipped with dials, either one may transfer a hotline call to another
station.
station.
2.
There is no limit to the number of hotline stations.
3.
Hotline assignments are programmed into system data via the MAINTENANCE ADMINISTRATION
TERMINAL (MAT) [M-18].
TERMINAL (MAT) [M-18].
4.
The hotline station will hear reorder tone when the called station is in busy, lockout or make busy
condition.
condition.
5.
When the station called from the hotline has activated CALL FORWARDING - BUSY LINE [C-2], the
call will be forwarded when the called station is busy.
call will be forwarded when the called station is busy.
6.
When the station called from the hotline has activated CALL FORWARDING - ALL CALLS [C-5], the
call will be forwarded.
call will be forwarded.
7.
When the station called from the hotline has activated CALL FORWARDING - DON'T ANSWER [C-3],
the call will be forwarded when the called station doesn't answer after a predetermined time interval.
the call will be forwarded when the called station doesn't answer after a predetermined time interval.
8.
STATION HUNTING [S -7, 8, 9] and UCD [U-1] will be activated for a call from the hotline, but the
incoming hotline call cannot be placed in the UCD [U-1] queue.
incoming hotline call cannot be placed in the UCD [U-1] queue.
9.
The hotline station will hear reorder tone (ROT) if the called station has set CALL FORWARDING - ALL
CALLS/BUSY LINE - OUTSIDE [C-28, 60].
CALLS/BUSY LINE - OUTSIDE [C-28, 60].
10.
An ISDN terminal cannot be assigned as a destination).
11.
This feature can be activated via FCCS.
12.
Only the station assigned telephone number is available for the station assignment when activating this
feature via FCCS.
feature via FCCS.
13.
The station, the Attendant Console/Desk Console (operator call), and the trunk can be a destination for
Hotline.
Hotline.
14.
When Call Forwarding - All Calls/Busy Line/Don’t Answer service has been set to the called station, these
features are available for the call to the station.
features are available for the call to the station.
15.
When a calling party encounters a busy station, the call may bridge into the connection depending on the
data assigned by the ASYD command.
data assigned by the ASYD command.
Interactions
1.
The connecting station does not have to be a HOTLINE station. If the connecting station is busy, the
HOTLINE station will hear reorder tone.
HOTLINE station will hear reorder tone.