NEC 2400 PX Manuale Utente
NEAX2400 IPX Feature Programming Manual
NDA-24297, Issue 1
NDA-24297, Issue 1
Page 393
Individual Trunk Access
I-4
Programming
STEP 1:
ASYD
- System Data 1, Index 68, Bit 1. Designates the method the Attendant Console must use to
operate INDIVIDUAL TRUNK ACCESS. 0/1: Route & Trunk Number/Listed Directory Number
(Central Office Code, ACOC).
(Central Office Code, ACOC).
System Data 1, Index 68, Bit 4. Is Trunk Select Key in service? 0/1: No/Yes. Assign data 1.
Optional
STEP 2:
ARTD
- If the Central Office Code option is exercised, assign data “1” in CDN 25.
STEP 3:
ACOC
- If the Central Office Code option is exercised, trunks in the system must be programmed to
have an associated Central Office Code. This code is dialed after pressing the Attendant Console’s
Trunk Select key.
Trunk Select key.
Note:
Central Office codes do not apply to stations. Stations permitted this feature must dial an Access Code, the
Trunk Route Number and the Trunk Number.
Trunk Route Number and the Trunk Number.
FCCS Programming
No unique programming is required for the FCCS network.