NEC 2400 PX Manuale Utente

NEAX2400 IPX Feature Programming Manual
NDA-24297, Issue 1

Page 421

Internal Zone Paging

I-21

Programming (cont’d)

STEP 5:

AIZP

- Assign INTERNAL ZONE PAGING group data.

TN:

Tenant number of calling party

IZPG:

INTERNAL ZONE PAGING group number

IZPTN:

Tenant number of IZPSTN

IZPSTN:

Station number assigned to the INTERNAL ZONE PAGING group

STEP 6:

AKYD

- For D

term

sets, INTERNAL ZONE PAGING can be activated using a programmable line/

feature key. Assign KYI=1, FKY=28 (Answer) for answering INTERNAL ZONE PAGING and
KYI=1, FKY=85 (INTERNAL ZONE PAGING) for calling INTERNAL ZONE PAGING group.

STEP 7:

ASFC

- Assign a Service Feature Class that allows SFI = 134 to the stations that originate

INTERNAL ZONE PAGING.

Assign a Service Feature Class that allows SFI = 145 to the stations that answer to INTERNAL ZONE
PAGING.

FCCS Programming

The following command assignments are required when your system is configured as an FCCS
network.

STEP 1:

ASYDL/ASYDN

- System Data 1, Index 804, bit 3 (Designation of the maximum digit number of

INTERNAL ZONE PAGING group number) 0/1=2/3 digits.

STEP 2:

ASYD

- System Data 1, Index 31 (Mounting capacity of Common Memory) must be assigned as data

“04”. System Data 1, Index 380, bit 4 0/1= Answer the INTERNAL ZONE PAGING call by Prime
Line Key after off-hook/by going off-hook.

STEP 3:

ANPD/ANPDL/ANPDN

- Reserve a number level for feature access. Assign for Normal (N) and

Hooking (H) services. Assign NND according to the predetermined numbering plan.

STEP 4:

ASPA/ASPAL/ASPAN

- Assign the access code for INTERNAL ZONE PAGING, SRV=SSCA

(Service Code Appendix), SIDA=98. Connection Status Indexes for Normal (N), and Hooking (H)
services.

STEP 5:

AIZPN

- Assign INTERNAL ZONE PAGING group data.

TN:

Tenant number of calling party

NIZPG:

Network INTERNAL ZONE PAGING group number (1~255)

IZPTN:

Tenant number of IZPSTN

IZPSTN:

Station number assigned to the INTERNAL ZONE PAGING group

UGN:

1 (Fixed)