NEC 2400 PX Manuale Utente
NEAX2400 IPX Feature Programming Manual
NDA-24297, Issue 1
NDA-24297, Issue 1
Page 451
Listed Directory Number
L-24
Service Conditions (cont’d)
7.
The user can program FPC of node with ATTCON, which receives LDN calls, to each node by using
ALDNN command.
ALDNN command.
8.
When “LDN assigned by ALDN command” and “LDN assigned by ALDNN command” are mixed in a
system, “LDN assigned by ALDNN command” takes precedence over “LDN assigned by ALDN
command”.
system, “LDN assigned by ALDNN command” takes precedence over “LDN assigned by ALDN
command”.
9.
FPC of a node which transmits Day/Night changeover information is determined by System Data 1 Index
640, and the information is transmitted to a node of FPC designated by System Data 1 Index 704.
640, and the information is transmitted to a node of FPC designated by System Data 1 Index 704.
Note:
The number of Telephone Number which can be programmed in a system is 65,535 at the maximum.
10.
When FCCS link between a node received a LDN call and a node with ATTCON is all busy, locked out,
make busy or etc., the calling party receives busy tone.
make busy or etc., the calling party receives busy tone.
Programming
STEP 1:
ASYD
- System Data 1, Index 70, Bit 0. Called Number Display when Call Forwarding to ATTCON
0/1: Out/In Service.
STEP 2:
ALDN
- Assign the LISTED DIRECTORY NUMBER.
FCCS Programming
The following command assignments are required to use this feature via FCCS link.
STEP 1:
ASYDL
- System Data 1, Index 640, Bit 0-7. Assign FPC of a node which transmits Day/Night
changeover information.
System Data 1, Index 704-735. Assign FPC of a node which receives the Day/Night changeover
information transmitted from the node assigned by System Data 1, Index 640, Bit 0-7 above.
information transmitted from the node assigned by System Data 1, Index 640, Bit 0-7 above.
STEP 2:
ANPDN
- Assign the first digit for Listed Directly Number (LDN).
TN:
Tenant Number (1-255)
1st DC:
1st Digit Code (0-9,*,#)
CI:
Connection Status Index (N = Normal/H = Hooking/B = Busy)
NND:
Number of Necessary Digits (max. 6 digits)
BLF:
Busy Lamp Field (0 = Out of Service/1 = In Service)
STEP 3:
ASPAN
- Assign the number of digit of access code for LDN.
TN:
Tenant Number (1-255)
ACC:
Access Code (max. 6 digits)
CI:
Connection Status Index (N = Normal/H = Hooking/B = Busy)
SRV:
Kind of Service (Designate TELN= Telephone Number)
NND:
Necessary Digits (1-16)
STEP 4:
ALDNN
- Assign FPC of a node with attendant console which receives the LDN call by dialing the
LDN.
TN:
Tenant Number (1-255)
LDN:
Listed Directory Number (max. 16 digits)
FPC:
Fusion Point Code of the node with attendant console which receives LDN calls
TYPE:
Number Type of Night Mode destination number of LDN. (Designate “0” = No night
transfer)
transfer)