NEC 2400 PX Manuale Utente
NEAX2400 IPX Feature Programming Manual
Page 484
NDA-24297, Issue 1
M-19D
Message Reminder - D
term
Service Conditions (cont’d)
5.
Messages can be displayed only when the station is on-hook. A message may be cleared by displaying the
message and pressing the “*” or “#” key on the called D
message and pressing the “*” or “#” key on the called D
term
's key pad.
6.
A message is cleared when it is obtained via the MSG key.
7.
Messages cannot be cleared by the message sender.
8.
A second message sent by the same calling D
term
is registered as a second unique message. The same
applies to the third and fourth messages.
9.
If a message is returned to an unattended station, the telephone number may be stored as a LAST
NUMBER DIALED [L-6], SAVE AND REPEAT [S-24], or a new MESSAGE REMINDER may be sent.
NUMBER DIALED [L-6], SAVE AND REPEAT [S-24], or a new MESSAGE REMINDER may be sent.
10.
Messages are sent to the forwarded-to station, which is set by CALL FORWARDING - ALL CALLS [C-
5] or CALL FORWARDING - BUSY/DON'T ANSWER [C-2, 3].
5] or CALL FORWARDING - BUSY/DON'T ANSWER [C-2, 3].
11.
Messages cannot be sent to a UCD [U-1] station when all stations in the UCD group are busy.
12.
Messages are sent to a dialed station when all stations in a Station Hunting (Circular) group are busy.
13.
If CALL WAITING - ORIGINATING [C-31] automatic operation is in service, it will supersede this
service. If a third station calls and receives busy tone, MESSAGE REMINDER - D
service. If a third station calls and receives busy tone, MESSAGE REMINDER - D
term
cannot be set.
14.
A maximum of 32 digits can be saved at the called party.
15.
To utilize the telephone number of the calling station, assign SYS1, Index 641, b0=1 by the ASYDN
command.
command.
16.
For the FCCS network, when using this feature with a D
term
Series E, the following circuit cards are
recommended:
Note:
If the D
term
Series III is accommodated on one of these circuit cards, a telephone number is indicated by the
first eight digits only.
17.
The setting station in the FCCS network must provide telephone numbers for this feature.
18.
Message (telephone number) is cleared by the circuit card initialization or the system initialization.
19.
Memory clear is necessary before reprogramming of station data and before using Follow Phone service.
Interactions
If CALL WAITING-ORIGINATING [C-31] automatic operation is in service, it will supersede MESSAGE
REMINDER-D
REMINDER-D
term
. If a third station calls and receives busy tone, MESSAGE REMINDER-D
term
can be set.
Programming
For Single-Line Sets
STEP 1:
ASYD
- System Data 1, Index 17, Bit 0.
Single-line stations able to use VOICE CALL [V-2D] and MESSAGE REMINDER features to a D
term
while hearing ringback tone?
0/1: Restricted/Allowed.
STEP 2:
ASFC
- Assign the single-line stations a feature class that allows SFI: 53, Message Reminder.
FUNCTION NAME
CIRCUIT CARD
16ELC
PA-16ELCJ
DAI
PA-DAIG, PA-DAIH, PA-DAIJ
2DAI
PA-2DAIK
DRU