NEC 2400 PX Manuale Utente
NEAX2400 IPX Feature Programming Manual
Page 588
NDA-24297, Issue 1
P-9
Priority Call
Interactions (cont’d)
3.
If the destination of a Priority Call is the Attendant Console, the Priority Call does not transfer to the
ATTENDANT NIGHT TRANSFER [A-19] station when the system goes into Night mode.
ATTENDANT NIGHT TRANSFER [A-19] station when the system goes into Night mode.
4.
A PRIORITY CALL will not be forwarded to outside.
Programming
STEP 1:
ASYD
- System Data 1, Index 168, Bit 6. Where will Priority Call terminate? 0/1: Attendant Console/
Station. If Attendant Console (0), go to Step 2, AAKP command.
System Data 2, Indexes 8 & 9. If the call will terminate to the Attendant Console, assign if the call will
be pegged for CALL WAITING LAMP [C-13].
be pegged for CALL WAITING LAMP [C-13].
STEP 2:
AAKP
- Assignment of Attendant Console Key Pattern. The ATN: Attendant Number (TRK No. for
RTE 901); KYN = 1-6, and FUNC = 3, Priority Call 1; FUNC = 4, Priority Call 2; FUNC = 5, Priority
Call 3. This command is not required if the Priority Call terminates at a station.
Call 3. This command is not required if the Priority Call terminates at a station.
STEP 3:
ANPD
- Reserve a Numbering Plan level for feature access. Assign Connection Indexes (CI), CI = N,
H, B; Normal (N), Hooking (H), and Busy (B) (applicable to any feature assigned to this level). Assign
NND in accordance with the predetermined numbering plan.
NND in accordance with the predetermined numbering plan.
STEP 4:
ASPA
- For SRV = SSC (Service Code) SID = 37, Priority Call 1; SID = 38, Priority Call 2; SID = 39,
Priority Call 3; assign the access code. Assign for CI of Normal (N).
STEP 5:
ASID
- This command defines the purpose of this Special Incoming Group and is used in conjunction
with the ASGD command. Assign the following:
TN:
Tenant Number
F:
Function Number (0-7)
4:
Priority Call 1
5:
Priority Call 2
6:
Priority Call 3
GN:
Group Number (1-7),
S/A:
Special Incoming Equipment
S:
Station
A:
Attendant Console
SSTN: Special Station Number
STEP 6:
ASGD
- This command defines the stations belonging to the Special Incoming Group. When the point
of termination is a station, assign the following:
TN:
Tenant Number
STN:
Station Number
F:
Function Number (0-7)
4:
Priority Call 1
5:
Priority Call 2
6:
Priority Call 3
GN:
Group Number (1-7)
STEP 7:
ASFC
- Service Feature Index (SFI) 54-Priority Call 1. SFI 55-Priority Call 2. SFI 56-Priority Call 3.
Assign a Service Feature Class to stations that allow one or all of the SFIs above, depending on system
configuration.
configuration.