NEC 2400 PX Manuale Utente
NEAX2400 IPX Feature Programming Manual
NDA-24297, Issue 1
NDA-24297, Issue 1
Page 629
Route Restriction - Announcement
R-27
R-27
Route Restriction - Announcement
General Description
This feature permits a station-originated call, dialed to a restricted outgoing number, to be automatically routed to a
recorded announcement informing the caller that the dialed number is restricted. (TOLL RESTRICTION [T-7])
recorded announcement informing the caller that the dialed number is restricted. (TOLL RESTRICTION [T-7])
Operating Procedure
No manual operation is required after this feature has been programmed in system data.
Service Conditions
1.
This service feature is available when a station-originated call encounters a restriction.
2.
Access to the announcement of this service feature is restricted by MISCELLANEOUS TRUNK
RESTRICTION [M-3].
RESTRICTION [M-3].
3.
The announcement machine can be provided on a per-tenant basis.
4.
The availability of this service cannot be determined for each originating route.
5.
TOLL DIVERSION [T-6] takes precedence over this feature.
6.
Digital Announcement Trunk (DAT) and the calling station must be accommodated in the same node
within the FCCS network.
within the FCCS network.
Programming
STEP 1:
ASYD
- System Data 2, Index 1, Bit 4, 5. Toll Restriction (disposition of Restricted Call) Assign Bits
4 and 5 as “0”.
STEP 2:
AAED
- Equipment type 7 = Outgoing Route Restriction Announcement
Also see ANNOUNCEMENT SERVICE
for programming of announcement and
MISCELLANEOUS TRUNK RESTRICTION
for trunk restriction programming.