NEC 2400 PX Manuale Utente
NEAX2400 IPX Feature Programming Manual
Page 658
NDA-24297, Issue 1
S-7
Station Hunting - Circular
FCCS Programming (cont’d)
STEP 2:
ASHCN
- This data must be assigned to the NCN.
Assign the Circular Hunt Group using Telephone Number.
UGN:
User Group Number
TELN:
Telephone Number in the Circular Hunt Group
First TELN:
First assigned Telephone Number
SECRETARY TELN: Secretary Telephone Number
STEP 3:
APHNN
- Assign Phantom Telephone Number (PHTELN) to each Circular Hunt Station
UGN:
User Group Number
TELN:
Telephone Number of the Circular Hunt Group
PH:
Phantom Number mode
0 = Used individually
0 = Used individually
1 = Used as the pilot number (for station hunting)
PHTELN:
Phantom Telephone Number
Note 2
Note 1:
When using ASYDL or ASYDN to program an FCCS feature, the basic programming of ASYD is required
in addition to ASYDL or ASYDN.
in addition to ASYDL or ASYDN.
Note 2:
Multiple PHTELNs (maximum of 16) can be assigned per TELN. Select whether to use each PHTELN for
station hunt or not by the “PH” parameter.
station hunt or not by the “PH” parameter.