NEC 2400 PX Manuale Utente
NEAX2400 IPX Feature Programming Manual
Page 888
NDA-24297, Issue 1
D-67
Data Line Privacy - CCIS
D-67
Data Line Privacy - CCIS
General Description
This feature automatically prevents interruptions from features such as ATTENDANT CAMP-ON WITH TONE
INDICATION - CCIS [A-45], BUSY VERIFICATION - CCIS [B-9], and EXECUTIVE RIGHT-OF-WAY - CCIS
[E-8] during data transmission through the CCIS network.
INDICATION - CCIS [A-45], BUSY VERIFICATION - CCIS [B-9], and EXECUTIVE RIGHT-OF-WAY - CCIS
[E-8] during data transmission through the CCIS network.
Operating Procedure
Data Connection (D
term
- Data Adapter/Data Module): No manual operation is required. When a data call is
activated (Data Adapter/Data Module), DATA PRIVACY - CCIS is set automatically. When the data transmission
has finished, DATA PRIVACY is automatically cancelled.
has finished, DATA PRIVACY is automatically cancelled.
Service Conditions
1.
The following connections are restricted when DATA PRIVACY - CCIS is active because transmitted
tones are involved in their operation.
tones are involved in their operation.
ATTENDANT CAMP-ON WITH TONE INDICATION
[A-1, A-45]
BUSY VERIFICATION
[B-3, B-9]
EXECUTIVE RIGHT-OF-WAY
[E-1, E-8]
If these features are attempted, a reorder tone will be received.
2.
DATA PRIVACY - CCIS cannot prevent disruptions in data transmission generated from outside the
CCIS network.
CCIS network.
3.
When the data call disconnects, DATA PRIVACY - CCIS is automatically cancelled.
4.
When DATA PRIVACY - CCIS is activated, the circuit cannot be accessed by any PBX feature.
5.
This feature cannot be activated at a Tandem Office in the CCIS network.
6.
DATA PRIVACY - CCIS must be set at both communicating offices in the CCIS network.
Interactions
DATA PRIVACY - CCIS is the disallowing of the EXECUTIVE RIGHT-OF-WAY [E-1, E-8], BUSY
VERIFICATION [B-3, B-9], and ATTENDANT OVERRIDE [A-7] features. All of the above options will provide
the desired effect.
VERIFICATION [B-3, B-9], and ATTENDANT OVERRIDE [A-7] features. All of the above options will provide
the desired effect.
Programming
Per-Route Basis
ARTD
- Assign CDN 44:PRV as data “1”, Line Privacy.
Per-Station Basis
ASFC
- Leave data “0” to SFI 4 and SFI 11 to the SFC assigned to the stations.
Per-Tenant Basis
ASYD
- System Data 2, Index 0, Bits 2, 3, & 4. Assign data “0”.