NEC MD302C6 Manuale Utente

This display has a USB 2.0 compliant hub. By connecting the supplied USB cable to a USB 2.0 port of the computer or another 
USB 2.0 hub, USB devices can be connected to the display directly.

With the computer and the display turned on, connect the supplied USB cable between the display’s USB upstream port and the 
computer’s USB 2.0 downstream port.

Back of the display

Computer

AC  IN

IMPORTANT:   Proper operation of all USB devices is not guaranteed. Depending on the computer, operating system, and/or 

peripheral devices used, the device may not work properly.

The supplied USB cable can also be used for the followings:

• 

To calibrate the display.

• 

To calibrate multiple displays in succession.

Connect the supplied USB cable between one of the display’s USB upstream port and the computer’s USB 2.0 downstream 
port. Regarding display calibration, please refer to the GammaCompMD QA user manual.

Up to six displays can be connected one after another in a daisy chain using USB cables.

1.  Connect the supplied USB cable between the fi rst display’s USB upstream port and the computer’s USB 2.0 port.

2.  Connect a USB cable between the fi rst display’s USB downstream port and the second display’s USB upstream port.

3.  Repeat step 2 until all displays are connected one after another.

Computer

Up to 5 sub monitors may be daisy-chained.