NEC MD302C6 Manuale Utente

English

The tilt and swivel stand, as shipped with the display, is interchangeable with commercially available wall mounts or multi-display 
mounting arms that:

• 

Come with a mounting plate with 6 slotted screw holes at 100 mm x 200 mm, and

• 

Bear the total weight of the LCD panel (without the stand) and the cables connected to it.

For more information ask your mounting arm supplier.

Note: 

Use the original screws to use the LCD panel back on its original tilt stand.

Choose the screw size carefully according to the mount plate thickness.
If the screws are too long, they could damage the internal parts. If they are 
too short, the connection becomes loose and the display could fall out.

Mounting plate thickness

Screw size

1.5 - 3.5 mm

ISO M4 x 12

1.  Place a soft cloth or cushioning material over a stable even surface.

2.  Put the display face down on the soft cloth.

3.  Remove 4 screws and detach the tilt stand, using a Phillips head screwdriver.

10-M4 Max. Depth 9 mm

Back of the display

Center of the display area

100 mm

100 mm

200 mm

100 mm

45 mm

Cushioning material

4.  Attach an arm stand.

NOTE: 

Do not try to attach the panel to the arm that is already fi xed in place by yourself. Ask for assistance of another 
person. Tipping the panel over or dropping it could cause damage and/or injury.