NEC GPRS Dial Up 1.1 Manuale Utente

 

 

23

Each time that you want to use the AT&T GPRS connection: 

1.  Check the NEC Wireless Phone’s battery level icon in the status bar of the Idle screen 

for sufficient charge.  The USB cable does not charge the phone’s battery. 

2.  Insert the computer end of the USB cable into the computer’s USB port.  Always use 

the same computer USB port. 

3.  Gently squeeze the release clips on each side of the USB plug and insert it into the 

adapter port of the NEC Wireless Phone. 

•  Be sure that the rectangular opening on the connection is lined up with the 

rectangular opening in the wireless phone.  The plug will slide easily into the 
opening.  DO NOT FORCE THE PLUG! 

4. Press 

the   (End/On-Off) key to power-on the NEC Wireless Phone. 

5.  Double-click on the connection shortcut icon on the desktop or go to Dial-Up 

Networking, and select the connection name. 

6. Click 

Connect to establish an active connection to AT&T Wireless GPRS service.  

Verify that the NEC Wireless Phone’s GPRS icon displays in the status bar of the 
phone’s Idle screen to show a connection has been made. 

7.  Open the browser software (Internet Explorer, Netscape Navigator

©, etc.).  You may 

have more than one browser open on your computer at a time. 

NOTE:  Other Internet browsers (such as Netscape Navigator) may work, but they have 

not been tested and are not supported by NEC.