NEC EXPRESS 5800 Manuale Utente

Boot Device Priority
The system searches for the boot device according to the order specified in this menu and use the
software to boot the system if found.

Move the cursor to select the device by 

↑↑↑↑

 or 

↓↓↓↓

, and then change the priority using + or –.

!

 

To start the EXPRESSBUILDER, specify "ATAPI CD-ROM Drive" to
1st Boot Device, and "Removable Devices" to 2nd Boot Device.

!

 

LAN port 1 and LAN port 2 are displayed with the same name.  LAN
port 1 is determined according to priority after [Load Setup Defaults]
is executed or factory-set (4th Boot Device).

!

 

For LAN device that does not boot with PXE, specify "Disabled" for
[Advanced] - [PCI Configuration] - [Onboard NIC 1], [Onboard NIC
2], and PCI slot containing optional LAN board.

1st Boot Device

Removable Devices

Attempts to boot from a removable
media device.

2nd Boot Device

ATAPI CD-ROM
Drive

Attempts to boot from an ATAPI CD-
ROM drive.

3rd Boot Device

Hard Drive

Attempts to boot from a hard drive
device.

4th Boot Device

Intel Boot Agent ver

Attempts to boot from a network (PXE
boot).

5thBoot Device

Intel Boot Agent ver

Attempts to boot from a network (PXE
boot).

Hard Disk Submenu
Set the boot priority of hard disks being connected to the server. The system searches for the boot
device according to the order specified in this submenu and use the software to boot the system if
found.

Move the cursor to select the device by 

↑↑↑↑

 or 

↓↓↓↓

, and then change the priority using + or –.

1. Drive #1 (or actual drive name)
2. Other bootable cards

"Other bootable cards" cover all the boot devices not
reported to the system BIOS through BIOS Boot
Specification mechanisms. It may or may not be
bootable, and may not correspond to any device.