NEC EXPRESS 5800 Manuale Utente
Configuring Your System 3-33
The Configuration menu appears.
Configuration
SCSI Bus Interface Definitions
Host Adapter SCSI ID .................................................
7
SCSI Parity Checking ..................................................
Enabled
Host Adapter SCSI Termination ..................................
Enabled
Additional Options
Boot Device Options....................................................
Press<Enter>
SCSI Device Configuration ..........................................
Press<Enter>
Advanced Configuration Options.................................
Press<Enter>
<F6> - Reset to Host Adapter Defaults
5.
Select a parameter for each menu item.
See the section "Parameters" described later to set an appropriate parameter for each
menu item.
See the section "Parameters" described later to set an appropriate parameter for each
menu item.
6.
After completing the parameter settings, press Esc repeatedly until the following save
message appears.
message appears.
Save Changes Made?
7.
If the configuration data is correct, select "Yes" and press Enter.
8.
Press Esc repeatedly until the following exit message appears.
Exit Utility?
9.
Select "Yes" and press Enter to exit.