NEC EXPRESS 5800 Manuale Utente
3-38 Configuring Your System
Submenu item
Parameter
Description
Sync Transfer Rate
(MB/Sec)
(MB/Sec)
[160]
20.0
80.0
16.0
53.4
13.4
40.0
10.0
32.0
ASYN
26.8
Select [160] as a recommended.
You may need to change the value
depending on your optional device.
Refer to the manual that comes with your
optional device.
You may need to change the value
depending on your optional device.
Refer to the manual that comes with your
optional device.
Initiate Wide
Negotiation
Negotiation
[Yes]
No
No
Select "Yes" if your SCSI device supports the
Wide SCSI interface. Select "No" if not.
Wide SCSI interface. Select "No" if not.
Enable Disconnection
[Yes]
No
No
Select "Yes".
Send Start Unit
Command
Command
[Yes]
No
No
Select "Yes" to send the command to the
hard disk. Otherwise select "No".
hard disk. Otherwise select "No".
Enable Write Back
Cache
Cache
Yes
No
[N/C]
No
[N/C]
Select "N/C".
BIOS Multiple LUN
Support
Support
Yes
[No]
[No]
Select "No".
Include in BIOS Scan
[Yes]
No
No
Select "Yes".
[ ]: Factory-set
!
Advanced Configuration Options
Move the cursor onto "Advanced Configuration Options" and press Enter to display the
following submenu.
following submenu.
Advanced Configuration Options
Reset SCSI Bus at IC Initialization................................................................. Enabled
Display <Ctrl><A> Message During BIOS Initialization .................................. Enabled
Extended BIOS Translation for DOS Driver > 1 GByte ................................... Enabled
Verbose/Silent Mode...................................................................................... Verbose
Options Listed Below Have NO EFFECT if MULTI LUN Support Is
Disabled
Host Adapter BIOS ........................................................................................ Enabled
Domain Validation ......................................................................................... Enabled
Domain Validation ......................................................................................... Enabled
Support Removable Disks Under BIOS as Fixed Disks .................................. Disabled
BIOS Support for Bootable CD-ROM.............................................................. Enabled
BIOS Support for Int13 Extensions................................................................ Enabled