NEC EXPRESS 5800 Manuale Utente
Troubleshooting 6-21
Problems with Express Setup
<For Windows 2000/Windows NT 4.0 Common>
Following message appeared when you tried to install Express Setup to the hard disk that has smaller
capacity than the specified partition size:
capacity than the specified partition size:
The specified partition size has exceeded the capacity of the hard disk.
The setup created the partition at the maximum size that can be reserved on the hard disk.
Setup will continue the process.
The setup created the partition at the maximum size that can be reserved on the hard disk.
Setup will continue the process.
OK
!
It is not an abnormal condition. Press Enter to continue the installation.
Following message appeared when copying the files from CD-ROM:
xxxxx : Not Ready xxxxxxxxxxxxxxxxxxZ
xxxxx(A), xxxxx(R), xxxxx(F)
!
Press R. When the message appears again even if you press R, restart the Express Setup
from the beginning. In case the same result occurred after the restart of installation,
contact Maintenance Service Company and ask them to check the CD-ROM drive.
from the beginning. In case the same result occurred after the restart of installation,
contact Maintenance Service Company and ask them to check the CD-ROM drive.
Express Setup terminated and asks to input setup information.
!
There are some errors on the specified setup information.
Follow the instruction to input the correct value. It is not necessary to cancel the
installation. On Windows 2000, you might be asked to press Enter again after the last
reboot of the setup.
Follow the instruction to input the correct value. It is not necessary to cancel the
installation. On Windows 2000, you might be asked to press Enter again after the last
reboot of the setup.
[Complete] appears on the [Role of Computer] screen.
!
If you click [Complete] here, the setup will select the default value of Express Setup for
the later specification to continue the process.
the later specification to continue the process.
<The Default Value for Windows 2000>
The specification of network protocol
Protocol :
TCP/IP[DHCP Specified]
Service :
Select sharing Microsoft network files and printer.
Client :
Microsoft network client.
Component :
SNMP, IIS (Excluding Professional)
Application :
ESMPRO Agent
Express Report Service
GAM Server (When connecting Mylex DAC)
GAM Client (When connecting Mylex DAC)
* DAC: Disk Array Controller
GAM Server (When connecting Mylex DAC)
GAM Client (When connecting Mylex DAC)
* DAC: Disk Array Controller