NEC EXPRESS 5800 Manuale Utente
7-24 Upgrading Your System
Installation
Take the following steps to install the CPU. The EXPRESSBUILDER CD-ROM provided with
the server is necessary for confirming that the additionally installed CPU is in normal state.
Provide the CD-ROM beforehand.
the server is necessary for confirming that the additionally installed CPU is in normal state.
Provide the CD-ROM beforehand.
1.
See the section "Preparing for Installation and Removal" described earlier to prepare.
2.
Pull out the server from the rack.
3.
Open the top cover.
4.
Remove the terminator by lifting the lever on the socket.
IMPORTANT:
Save the removed terminator for future use.
5.
Put the CPU slowly and gently on the socket.
IMPORTANT:
Be aware of CPU direction. Pin layouts on two corners
among four differ from others to prevent an incorrect insertion. Confirm
the pin mark and pin layout on the socket, and insert the CPU correctly.
the pin mark and pin layout on the socket, and insert the CPU correctly.
Pin mark
Terminator
Lever