NEC EXPRESS 5800 Manuale Utente

Use the following procedure to take out the server from the rack:

Observe the following instructions to use the server safely.  Failure to follow
these instructions may result in death or serious personal injury.

■

 

Do not lift the server only by a single person.

■

 

Do not pinch your finger with mechanical components.

■

 

Do not apply any load on the server pulled out from the rack.

■

 

Do not pull out a device from the rack if the rack is unstable.

■

 

Do not leave more than one device being pulled out from the rack.

■

 

Do not pull out the server from the rack while it is operating.

Confirm that the power of the server is OFF, and disconnect the power cable and all the
interface cables connected to the server.

Remove the front bezel.

Loosen two front screws.

Set screws