NEC EXPRESS 5800 Manuale Utente
3-12 Configuring Your System
Advanced
Move the cursor onto "Advanced" to display the Advanced menu. The menu item preceded by
"
"
" mark has its submenus. Select an option with the "
" mark and press Enter to display its
submenu.
See the table below for setup options on the screen.
Option
Parameter
Description
Your Setting
Reset Config Data
[No]
Yes
Yes
Select "Yes" to clear the configuration data
(system information stored by POST). The
parameter "No" will be resumed when the
server restarts.
(system information stored by POST). The
parameter "No" will be resumed when the
server restarts.
Numlock
[Off]
On
On
Enable or disable the Numlock function at
system start-up. If "Auto" is selected, the
Numlock function will be enabled when an
entry with the keypad is detected.
system start-up. If "Auto" is selected, the
Numlock function will be enabled when an
entry with the keypad is detected.
[ ]: Factory-set
IMPORTANT:
!
Boot Monitoring feature is not supported in this server.
!
If Reset Config Data is set to "Yes", boot device priority is also
cleared. Take a note of boot device priority before changing the
parameter. Restart the server with Exit Saving Changes option, start
BIOS SETUP utility, and restore the boot device priority.
cleared. Take a note of boot device priority before changing the
parameter. Restart the server with Exit Saving Changes option, start
BIOS SETUP utility, and restore the boot device priority.