NEC NP600CM Manuale Utente
ISSUED: 08-05-08 SHEET #: 056-9008-1
Visit the Peerless Web Site at www.peerlessmounts.com
8 of 10
For customer care call 1-800-865-2112 or 708-865-8870.
Align shoulder on connection block opposite notch
in adapter plate (AA). Attach adapter plate to
connection block from projector mount
assembly (A) using two #10-32 x 3/8" serrated
washer head socket pin screws (C) as shown in
figure 3.1. Tighten using 4 mm allen wrench (B).
in adapter plate (AA). Attach adapter plate to
connection block from projector mount
assembly (A) using two #10-32 x 3/8" serrated
washer head socket pin screws (C) as shown in
figure 3.1. Tighten using 4 mm allen wrench (B).
CONNECTION BLOCK
C
NOTCH INDICATES
FRONT OF PROJECTOR
FRONT OF PROJECTOR
SHOULDER
Attaching Adapter Plate to Projector
3
fig. 3.1
BB
Flip projector upside down and attach adapter plate (AA) using three serrated socket pin screws (BB) and retain-
ing spacers (CC) as shown below. Tighten using 4 mm allen wrench (B).
ing spacers (CC) as shown below. Tighten using 4 mm allen wrench (B).
AA
CC
NOTE: Retaining spacers (CC) go between the
projector and adapter plate (AA).
projector and adapter plate (AA).
AA
4