NEC DLP Cinema Projector NC2500S Manuale Utente
1. What’s in the Box? and the Names of the Projector Parts
8
1-3-3. Lamp power supply unit (LPSU)
2
3
5
4
1(Rear)
6
1. Air outlet
This exhausts heat from the lamp power supply unit.
2. Main power switch
This is the main power switch for the lamp power supply unit.
3. AC power cord
The AC power cord is not an accessory. Request service personnel to connect the power cord.
4. Two lamp power cords
These connect to the lamp power supply input terminals of the projector. Request service personnel to connect the
power cord.
5. Control terminal (Dedicated interface cable)
This connects to monitor the status of the lamp power supply unit from the projector head.
6. Air inlet
Outside air is taken in here to lower the temperature inside the projector. Do not cover this inlet.
NOTE
• Do not touch the air outlet and backside of the main unit when your projector is operating. Otherwise, the
high temperature may cause burns.
• Do not cover the air inlet and outlet during operation. Inadequate air intake may lead to a rise in inside
temperature, thus causing a free or serious projector failure.