NEC EXPRESS5800 Manuale Utente
-
31
-
3.6 Creating Disk Array or Logical Driver
A disk array can be created in any of the following three ways.
Automatic Configuration
Checks the number of unconfigured HDDs connected currently and
creates disk arrays of a proper capacity and RAID level and logical
drives automatically.
creates disk arrays of a proper capacity and RAID level and logical
drives automatically.
Express Configuration
Creates disk arrays and logical drives semi-automatically only if you
select a RAID level fit to the environment used and the number of
logical drives to be created.
select a RAID level fit to the environment used and the number of
logical drives to be created.
Advanced Configuration
Creates disk arrays and logical drives if you select or enter every
parameter.
parameter.
3.6.1 Automatic
Configuration
1. Click Disk Arrays in the Tree View.
2. Click the Create tab in the Management Window and select Automatic Configuration.
3. Click [Submit].
Disk arrays and logical drives are automatically created.
In the automatic configuration, the RAID level to be created is automatically determined
depending on the number of free HDDs as follows:
depending on the number of free HDDs as follows:
RAID0 for a single HDD
RAID1 for two HDDs
RAID5 for three HDDs
RAID5 for four HDDs
RAID1 for two HDDs
RAID5 for three HDDs
RAID5 for four HDDs
3.6.2 Express
Configuration
1. Click Disk Arrays in the Tree View.
2. Click the Create tab in the Management Window and select Express Configuration.