Juniper Networks 5000 SERIES Manuale Utente
Removing and Installing a Mini-GBIC Transceiver
NetScreen-5000 Series
39
R
EMOVING
AND
I
NSTALLING
A
M
INI
-GBIC T
RANSCEIVER
To remove a mini-GBIC transceiver from a module:
1.
Push in the black ejector (located on the underside of the transceiver) until it
locks into place, disengaging the transceiver.
locks into place, disengaging the transceiver.
2.
Grasp the transceiver at both sides then, firmly but gently, pull the transceiver
toward you to remove it from the module.
toward you to remove it from the module.
To install a mini-GBIC transceiver into a module:
1.
Grasp the transceiver with the label facing up, then insert it into the transceiver
slot until seated.
slot until seated.
2.
Check to see if the black transceiver ejector extends fully out to the front of the
ejector slot, flush with the port portion of the transceiver.
ejector slot, flush with the port portion of the transceiver.