Jonsered BB2250 Manuale Utente

Pagina di 17
 
English
 
4  
 
SAFETY FIRST
 
Instructions contained in warnings within this manual and 
warning seals marked with a 
 symbol on the blower concern 
critical points which must be taken into consideration to prevent 
possible serious bodily injury, and for this reason you are 
requested to read all such instructions carefully and follow them 
without fail.
 
Notes on types of warnings 
WARNING
 
Instructions labeled as shown above, concern critical steps 
or procedures which must be followed in order to prevent 
accidents which could lead to serious bodily injury or 
death.This mark is used to indicate instructions which must 
be followed without exception.
IMPORTANT
 
Instructions labeled as shown above concern steps or 
procedures which, if not followed correctly, could lead to 
mechanical failure, breakdown, or damage.
NOTE
 
Used to label supplementary instructions designed to 
provide hints or directions useful in the use of the product.
 
Symbols
 
WARNING! The machine can be a dangerous 
tool if used incorrectly or carelessly, which can 
cause serious or fatal injury to the operator or 
others.
Please read the operator’s manual carefully 
and make sure you understand the 
instructions before using the machine.
Always wear:
• Hearing protection
• Approved eye protection
This product is in accordance with 
applicable EC directives.
Always wear protective gloves.
The blower can forcibly throw objects that 
can bounce back. This can result in 
serious eye injuries if the recommended 
safety equipment is not used.
The blower operator must make sure 
that no bystanders or animals come 
nearer than 50 feet (15 meters). 
Whenever several operators are 
working in the same work area, they should maintain a safe 
distance of at least 50 feet (15 meters) from one another.
A breathing mask should be used when 
there is a risk of dust.
Keep all parts of your body away from hot 
surfaces.
Noise emission to the environment according 
to the European Community’s Directive. The 
machine’s emission is specified in chapter 
Technical data and on label.
 
Other symbols/decals on the machine refer to special 
certification requirements for certain markets.
IMPORTANT
 
If the warning label peels off or becomes soiled and 
impossible to read, you should contact the dealer from 
which you purchased the product to order new labels and 
affix them in the required location(s).
 
Warning labels on the machine
 
Safety
 
BB2250_English.fm  Page 4  Thursday, December 10, 2009  1:35 PM