MRV Communications EM316-2SFP Manuale Utente

 

 

EM316-2SFP User Guide 

 

 

P/N 1259003-001 Rev C3

 

 

8

 

 
The EM316-2SFP accepts any SFP that complies with the MSA standard. Use MRV components 
for guaranteed results. 
 

Follow all ESD precautions listed at the front of this manual. 
 

3.5.1 Cleaning Fibers 
 

Fiber optic components and cables are very sensitive to dirt, dust and mishandling, especially in high-

speed networks. Dirty or mistreated fiber may cause errors and an unwanted degradation of signal 

quality. 

 

Prior to an installation the fiber and fiber optic transceivers should be cleaned following the 
procedure below. 

 

•  Optical cleaner cartridge 
•  Can of compressed air 

 

 

Figure 9   -- Cleaning cartridge 

 

 
 

1.  Blow a stream of compressed air on the fiber ends while the caps are in place. 
2.  Remove the caps, and blow the ends of the fibers again. 
3.  Clean the ends of the fibers using the cleaner cartridge; follow the instructions 

included with the cartridge. 

 
 

Fiber Inspection 

 

Figure 10 -- Contaminated fiber and clean fiber through a scope