Mocomtech CDM-570 Manuale Utente

CDM-570/570L Satellite Modem with Optional IP Module 

Revision 4 

Appendix F 

MN/CDM570L.IOM 

 Mode  Switches  Voltages 
 
The user is prompted to select from 1 of 4 items. 

◄ ►,

ENT) 

 
The cursor will be flashing under either CSAT#1 or CSAT#2.  This is the indication of 
the currently Online unit.  If the user desires to change the Online unit the 

◄ ► 

arrow 

keys are used to move the cursor position and then the ENT key must be depressed. 
 
NOTE: If the ODU Redundancy system is in AUTO mode, a ‘forced switch-over’ can 
only occurs if the currently Offline unit is fault-free. 

◄ ►,

ENT) 

 
The cursor will be flashing under either Manual or Auto.  This is the indication of the 
current operating mode of the 1:1 ODU system.  If the user desires to change the 
operating mode of the 1:1 system, the 

◄ ► 

arrow keys are used to move the cursor 

position and then the ENT key must be depressed. 

 Tx=OK Rx=OK (ENT or CLR) 
 
This menu item provides the status of both the Tx and Rx Waveguide transfer Switches.  
If either Switch is reporting an ambiguity from the commanded position the “OK” will 
change to “FT”.  This indicates a switch fault. 

 Redundancy Box Voltages: 

 5V= 5.0  12V=12.0  (ENT) 
 
This menu item provides monitor of the voltages inside the Redundancy Controller Box.  
This is provided to assist in trouble-shooting system problems. 

F–4