Microsoft ES4625 Manuale Utente

Pagina di 674
Configuring the Switch
3-252
3
Configuring Summary Addresses (for External AS Routes)
An Autonomous System Boundary Router (ASBR) can redistribute routes learned 
from other protocols into all attached autonomous systems. (See “Redistributing 
External Routes” on page 3-253)
 To reduce the amount of external LSAs imported 
into your local routing domain, you can configure the router to advertise an 
aggregate route that consolidates a broad range of external addresses. 
Command Usage
• If you are not sure what address ranges to consolidate, first enable external route 
redistribution via the Redistribute Configuration screen, view the routes imported 
into the routing table, and then configure one or more summary addresses to 
reduce the size of the routing table and consolidate these external routes for 
advertising into the local domain. 
• To summarize routes sent between OSPF areas, use the Area Range 
Configuration screen (page 3-241).
Command Attributes
• IP Address – Summary address covering a range of addresses.
• Netmask – Network mask for the summary route.
Note:
This router supports up 16 Type-5 summary routes. 
Web - Click Routing Protocol, OSPF, Summary Address Configuration. Specify the 
base address and network mask, then click Add.
Figure 3-142   OSPF Summary Address Configuration