Microsoft ES4625 Manuale Utente
Command Line Interface
4-234
4
Example
The following shows how to configure port 11 as a multicast router port within VLAN 1:
The following shows how to configure port 11 as a multicast router port within VLAN 1:
show ip igmp snooping mrouter
This command displays information on statically configured and dynamically learned
multicast router ports.
multicast router ports.
Syntax
show ip igmp snooping mrouter [vlan vlan-id]
vlan-id - VLAN ID (Range: 1-4093)
Default Setting
Displays multicast router ports for all configured VLANs.
Command Mode
Privileged Exec
Command Usage
Multicast router port types displayed include Static or Dynamic.
Example
The following shows that port 11 in VLAN 1 is attached to a multicast router:
The following shows that port 11 in VLAN 1 is attached to a multicast router:
IGMP Commands (Layer 3)
Console(config)#ip igmp snooping vlan 1 mrouter ethernet 1/11
Console(config)#
Console(config)#
Console#show ip igmp snooping mrouter vlan 1
VLAN M'cast Router Ports Type
---- ------------------- -------
---- ------------------- -------
1
Eth 1/11
Static
2
Eth 1/12
Dynamic
Console#
Table 4-77 IGMP Commands (Layer 3)
Command
Function
Mode
Page
ip igmp
Enables IGMP for the specified interface
IC
ip igmp robustval
Configures the expected packet loss
IC
ip igmp query-interval
Configures frequency for sending host query messages
IC
ip igmp max-resp-interval
Configures the maximum host response time
IC
ip igmp
last-memb-query-interval
Configures frequency for sending group-specific host query
messages
IC
ip igmp version
Configures IGMP version used on this interface
IC
show ip igmp interface
Displays the IGMP configuration for specified interfaces
NE, PE
clear ip igmp group
Deletes entries from the IGMP cache
PE
show ip igmp groups
Displays detailed information for IGMP groups
NE, PE