Microsoft ES4625 Manuale Utente
Command Line Interface
4-314
4
show ip pim neighbor
This command displays information about PIM neighbors.
Syntax
show ip pim neighbor [ip-address]
ip-address - IP address of a PIM neighbor.
Default Setting
Displays information for all known PIM neighbors.
Command Mode
Normal Exec, Privileged Exec
Example
Router Redundancy Commands
Router redundancy protocols use a virtual IP address to support a primary router
and multiple backup routers. The backup routers can be configured to take over the
workload if the master router fails, or can also be configured to share the traffic load.
The primary goal of router redundancy is to allow a host device which has been
configured with a fixed gateway to maintain network connectivity in case the primary
gateway goes down.
and multiple backup routers. The backup routers can be configured to take over the
workload if the master router fails, or can also be configured to share the traffic load.
The primary goal of router redundancy is to allow a host device which has been
configured with a fixed gateway to maintain network connectivity in case the primary
gateway goes down.
Console#show ip pim neighbor
Address
VLAN Interface
Uptime
Expire
Mode
--------------- ---------------- -------- -------- -------
10.1.0.254
1
17:38:16 00:01:25
Dense
Console#
Table 4-110 show ip pim neighbor - display description
Field
Description
Address
IP address of the next-hop router.
VLAN Interface
Interface number that is attached to this neighbor.
Uptime
The duration this entry has been active.
Expire
The time before this entry will be removed.
Mode
PIM mode used on this interface. (Only Dense Mode is supported.)
Table 4-111 Router Redundancy Commands
Command Groups
Function
Page
Virtual Router Redundancy
Protocol
Configures interface settings for VRRP