Magma MDR 24/96 Manuale Utente

MDR 

24/

96

DIGI-I/O

Before starting a Project, you will need to configure the MDR24/96 I/O card
options and synchronization parameters. These parameters determine where the
sample clock is coming from, how fast the sample clock runs, and how many bits
are recorded in every sample. Some options, like sample rate and bit depth, will
become “standards” that you won’t need to change very often. The remaining
synchronization options (for time code and video) are covered in detail in the
Technical Reference manual.

Only the DIO•8 and PDI•8 cards require special configuration. If you are using
AIO•8 or OPT•8 cards only, you can skip to the next section.

1.  Press Digi I/O to enter

the Digital I/O Card Setup
screen.

2.  Select In.

The Setup Tape Inputs screen shows
you the current input settings for
each of the three I/O cards.

3.  Press the Select button

corresponding to each DIO•8 card
and toggle the selection between ADAT and TDIF.

4.  Press the Page Left (<) button to return to the previous screen.

5.  Now select Out.

The Setup Tape Outputs screen
shows you the current output
settings for each of the three I/O
cards.

6.  For each DIO•8 card present,

press the Select button to select the desired output format. Or, select
the TD–>AD or AD–>TD option to convert between formats, bypassing
the MDR24/96 tape signal path entirely.

7.  When done, press Digi I/O to exit the menu.

 (SETUP TAPE INPUTS)

 1-8   9-16  17-24

 ADAT  ADAT  ADAT

 (SETUP TAPE OUTPUTS)

 1-8   9-16  17-24

 ADAT  ADAT  ADAT

 DIGITAL I/O Card Setup

          Stat  Rate

 In  Out  Bits  Convert