Magma MDR 24/96 Manuale Utente

MDR 

24/

96

1. Read instuctions — Read, understand and follow all safety and operating

instructions before using the MDR24/96. 

2. Retain Instructions — Keep these safety and operating instructions for future

reference.

3. Heed Warnings — Follow all warnings on the MDR24/96 and in these

operating instructions.

4. Water and Moisture — Do not use the MDR24/96 near water – for

example, near a bathtub, kitchen sink, garden hose, incontinent poodle,
sweaty drummer, etc. – or when condensation has formed on the unit.

5. Heat and Ventilation — Locate the MDR24/96 away from heat sources such

as radiators, campfires, compost pits, heliarc welders, magma flows, etc. Do
not block MDR24/96 ventilation openings or install in spaces that prevent
adequate air circulation to the unit.

6. Power Sources — Connect the MDR24/96 only to a power source of the type

described in these operating instructions or as marked on the MDR24/96.

7. Power Cord Protection — Route power supply cords so that they are not likely

to be walked upon, tripped over, or abraded by items placed upon or against
them. Pay particular attention to cords at plugs, convenience receptacles, and
the point where they exit the MDR24/96.

8. Object and Liquid Entry — Do not drop objects or spill liquids into the

MDR24/96. Clean only with a damp cloth; do not clean with liquid or aerosol
cleaners.

9. Attachments — Use the MDR24/96 with only the accessories specified in

this manual.

10. Damage Requiring Service — The MDR24/96 should be serviced only by

qualified service personnel when:

A. The power supply cord or the plug has been damaged; or

B. Objects have fallen onto, or liquid has spilled into the unit; or

C. The unit has been exposed to rain or water; or

D. The unit does not appear to operate normally or exhibits a marked

    change in performance; or

E. The unit has been dropped, or its chassis damaged.

11. Servicing — Do not attempt to service the MDR24/96. All servicing

should be referred to the Mackie Service Department.

12. Lightning — Unplug the MDR 24/96 during lightning storms or when

unused for long periods of time.

13. Grounding and Polarization — To prevent electric shock, do not use the

MDR24/96 polarized plug with an extension cord, receptacle or other
outlet unless the blades can be fully inserted to prevent blade exposure.
Do not defeat the MDR24/96 grounding by plugging into an ungrounded
receptacle or ground lift adapter.

This apparatus does not exceed the Class A/Class B (whichever is applicable)
limits for radio noise emissions from digital apparatus as set out in the radio
interference regulations of the Canadian Department of Communications.

ATTENTION — Le présent appareil numérique n’émet pas de bruits
radioélectriques dépassant las limites applicables aux appareils numériques de
class A/de class B (selon le cas) prescrites dans le réglement sur le brouillage
radioélectrique édicté par les ministere des communications du Canada.

This product has been tested and complies with the
following standards and directives as set forth by the
European Union:

* EN 55022 Radiated and Conducted Emissions

* EN 61000-4-2 Electrostatic Discharge Immunity

* EN 61000-4-3 RF Electromagnetic Fields Immunity

* EN 61000-4-4 Electrical Fast Transient/Burst Immunity

* EN 60950/IEC 950 Electrical Safety Requirements

NOTE: This equipment has been tested and found to comply
with the limits for a Class A digital devices, pursuant to Part 15
of  the  FCC  Rules.  These  limits  are  designed  to  provide
reasonable  protection  against  harmful  interference  when  the
equipment  is  operated  in  a  commercial  installation.  This
equipment  generates,  uses,  and  can  radiate  radio  frequency
energy  and,  if  not  installed  and  used  in  accordance  with  the
instruction  manual,  may  cause  harmful  interference  to  radio
communications. Operation of this equipment in a residential
area is likely to cause harmful interference in which case the
user  will  be  required  to  correct  the  interference  at  his  own
expense.

RISK OF ELECTRIC 

SHOCK 

DO NOT OPEN

RISQUE DE CHOC ELECTRIQUE

NE PAS OUVRIR

CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK

DO NOT REMOVE COVER (OR BACK)

NO USER-SERVICEABLE PARTS INSIDE

REFER SERVICING TO QUALIFIED PERSONNEL

   The lightning flash with arrowhead symbol within an equilateral 
triangle is intended to alert the user to the presence of uninsulated
"dangerous voltage" within the product’s enclosure, that may be 
of sufficient magnitude to constitute a risk of electric shock to persons.

   The exclamation point within an equilateral triangle is intended to 
alert the user of the presence of important operating and maintenance 
(servicing) instructions in the literature accompanying the appliance.

WARNING — Before applying power to the MDR24/96, make sure that the

Voltage Selector switch next to the AC inlet jack on the rear panel is set to
the line voltage used in your region.  Powering-on the MDR24/96 with
the Voltage Selector switch set incorrectly will cause an electrical and fire
hazard that may result in irreparable damage to the unit.

WARNING — To reduce the risk of fire or electric shock, do not expose this

appliance to rain or moisture.