LXE MX5X Manuale Utente

286

Appendix C MX5X CE .NET 4.2

MX5X Reference Guide

E-EQ-MX5CERG-F-ARC

Symbol Client (CE .NET 4.2 only)

Note:

When making changes to profile parameters, the mobile device should be warmbooted
afterwards unless noted otherwise.

Prerequisites

• Windows CE .NET 4.2 operating system

• Network SSID or ESSID number of the Access Point

• WEP or LEAP Authentication Protocol Keys

Access: Tap the Network Connected Icon in the Status Bar

IP Information Tab

After the IP Address has been assigned to the mobile device, tap the Renew button to renew the IP
address if necessary. Tap the Details button to view the Network Connection details.

IPv6 Information Tab

This is the TCP/IPv6 information screen. The contents cannot be edited by the user.

Configuring IPv6

By default, IPv6 is enabled and an IPv6 broadcast message is sent on power up. To disable IPv6,
run \Windows\ipv6Disable.reg and perform a warmboot. To enable IPv6, run
\Windows\ipv6Enable.reg and perform a warmboot. Contact your LXE representative for
ipv6Disable.reg and ipv6Enable.reg availability.

Note: These utilities affect the behavior of the IPv6 on warmboot. After a coldboot, IPv6 is

enabled.

Wireless Information Tab

Factory Default Settings

Wireless Information tab
Notify when new networks available

Enabled

Advanced Button
Use Windows to configure wireless settings

Enabled

Automatically connect to non-preferred networks

Disabled

Networks to access (Only Apps, Only comp-to-comp)

All available

Encryption (WEP, TKIP)

WEP

Authentication (WPA, Open, Shared, WPA-PSK)

WPA

Ad hoc network

Disabled

Key provided automatically

Enabled

Enable 802.1X authentication

Enabled

EAP Type (MDF-Challenge, PEAP, TLS)

TLS