Luxeon polysilicone LCD Projection lamp AV-X2Plus Manuale Utente

 

19

English

Important: The lamp contains trace amount of mercury.  Some government
required special disposal of lamps containing mercury.  Dispose of lamps in
accordance with the law and any applicable local regulations.

The lamp module should be replaced with a certified replacement part.  To
order a new lamp, contact your local dealer.

After change the lamp module, see “Lamp Hours Reset” on page 15 to reset
lamp hours.

Warning:

1.When replacing the lamp, be sure to turn off power and unplug the power

cord.  To avoid burns, wait 45 minutes before opening the lamp module
door and do not touch any hot surface inside.

2.Do not loosen or remove any screw other than lamp module or its door.

Doing so may cause electric shock.

1.Turn off the projector and let the unit cool down at least 45 minutes.

2.Unplug the power cord from projector.

3.Turn the projector upside down.  Loosen the screw with a flat head screw-

driver then lift up to remove the lamp module door and keep screw on the
door carefully.