Lumex Syatems Zhejiang Lumex Syatems Co. Ltd. Car Seat FR587W Manuale Utente

FR587W-INS-LAB-RevC13: Deluxe Extra-Wide Clinical Care Recliner Assembly and Operating Instructions 

16

9.  Insert the Y-cable connector labeled UPPER into the back cushion 

cable connector also labeled UPPER until its locking tabs snap into 
place, as shown at right.

10. Insert the Y-cable connector labeled LOWER into the back cushion 

cable connector also labeled LOWER until its locking tabs snap into 
place, as shown at right.

11. Insert the Y-cable connector labeled MASSAGE into the control 

module connector also labeled MASSAGE (see picture of control 
module at top of previous page) until its locking tab snaps into 
place.

12. Insert the seat cushion cable connector labeled HEAT A into the 

back cushion cable connector also labeled HEAT A until its locking 
tabs snap into place, as shown at right.

13. Insert the cable connector labeled HEAT into the control module 

connector also labeled HEAT (see picture of control module at top of previous page) 
until its locking tab snaps into place.

14. Place the cable labeled HEAT A inside the junction box. Replace the junction box cover; 

replace the two hex head screws that secure the junction box cover (see picture of 
junction box at top of previous page). Use a 

1

/

4

" hex wrench to secure the screws.

15. Gather loose cable sections and secure them with the plastic cable ties furnished (see 

picture of junction box at top of previous page).

16. With assistance, carefully return the recliner to its upright position.
17. Reinstall the left side table with the ball lock pin.
18. The Heat and Massage Unit is now ready for operation. Instructions for use follow.

s

Heat and Massage Unit Operation Instructions
1.  Plug the power supply cord into any grounded outlet.
2.  The Heat and Massage Unit is operated 

using the single multi-position selector 
switch located on the right side of the 
recliner underneath the armrest. The 
Heat and Massage Functions can be 
operated independently. The selector 
switch faceplate is shown at right.

3.  Press the selector switch UP to activate 

the HEAT FUNCTION.

4.  Press the selector switch DOWN to 

activate the MASSAGE FUNCTION.