LOEWE Spheros R 37Full-HD+ Manuale Utente
41 -
Connecting other speaker systems or active
speakers to the Dolby Digital Decoder
speakers to the Dolby Digital Decoder
If you want to use another similar speaker system or active speakers,
you can connect these to the AUDIO LINK interface of the TV set with
an adapter cable.
The adapter cable is available from your dealer (see Accessories, page 55).
you can connect these to the AUDIO LINK interface of the TV set with
an adapter cable.
The adapter cable is available from your dealer (see Accessories, page 55).
Connecting
Before connecting any devices ensure that they are switched off or
unplug their mains plug.
Plug the adapter cable into the AUDIO LINK interface of the TV set. Con-
nect the cinch connections of the adapter cable to the connections of
the corresponding active speakers.
The cinch connections of the adapter cable are labelled:
Before connecting any devices ensure that they are switched off or
unplug their mains plug.
Plug the adapter cable into the AUDIO LINK interface of the TV set. Con-
nect the cinch connections of the adapter cable to the connections of
the corresponding active speakers.
The cinch connections of the adapter cable are labelled:
R for front right
L for front left
C for centre
SR for surround right
SL for surround left
SUB for subwoofer
The connections on the adapter cable are preamplifier outputs. Therefore,
only active speakers may be connected directly to the adapter cable.
Operating additional equipment
Adjusting the speaker system
Calling the sound components wizard
➠
In normal TV mode, without other displays.
Call TV menu.
34
Select Connections,
6 go to the menu line below.
34
Select Sound components,
OK calls the sound components wizard.
Sound playback via ... speakers system
Enter here that you want to hear the TV sound over a speaker system.
If you connect active speakers, please use the setting Speakers system.
Enter here that you want to hear the TV sound over a speaker system.
If you connect active speakers, please use the setting Speakers system.
6
Mark Speakers system,
OK to continue.
If nothing has been set yet then the factory values will
be displayed, otherwise the values last set will be
displayed.
be displayed, otherwise the values last set will be
displayed.
continued on the next page
END
OK
OK
TV speakers
Speakers system
HiFi/AV amplifier
HiFi/AV amplifier or TV speaker (switchable)
Sound components
Sound playback via ...
Sound playback via ...
Sound components wizard
Please specify here via which sound components you want to listen to your
TV sound. If you select a "Speaker system", this must be connected to the
AUDIO LINK socket on the back of the TV set (with an additional adapter if
necessary).
If your TV has no built-in speakers, the sections relating to "TV speakers“ may
not be selected.
Proceed
END
OK
OK
Proceed
Configuration/modification
Speakers system
Sound components
Sound components wizard
Please specify whether you want to change the illustrated setting of your
speakers system or whether all existing settings are to be reset to the values
of the delivery state.
Components Distances Level
4,0m
4,0m
0dB
0dB
Reset to factory settings
TV
TV
TV
TV
TV
TV
R
SR
SL
L
C
SUB
R
SR
SL
C
SUB
L
Adapter cable
TV set
Front
Right
Front
Left
Surround
Left
Surround
Right
Centre
Subwoofer
Connection of active speakers to the TV set