Manualsbrain.com
  1. Manuali
  2. Marche
  3. Lightwave Communications
  4. SCS3230
  5. Manuale Utente

Lightwave Communications SCS3230 Manuale Utente

Scarica
Pagina di 97
ConsoleServer 3200 System  
 
Lightwave Communications 
Rev. A 
- 22 -  
www.lightwavecom.com 
Two options for your installation exist:  
 
•
  you are either UPGRADING a CS3200 system to be an SCS3230 system, or  
•
  you are installing a NEW SCS3230 system.  
 
For simplicity, we will refer to a ConsoleServer 3200 system with the NETWORK/CONTROL 
card installed as a SCS3220 system. In either case above, you will use THIS GUIDE for 
administering the SCS3230 features and options, while referring to the ConsoleServer 3200 
manual for a majority of the hardware installation instructions.  
 
•
  When you purchase a CS3200 chassis, you will get the CS3200 manual (PN 15.00.017).  
•
  When you purchase a SCS3230 NETWORK/CONTROL card, you will get the SCS3230 
System Administrator's Guide (this manual, PN 15.00.038).  
 
NOTE: The majority of this System Administrator's Guide is intended for the administration and 
setup of the system, when using the SCS3230 kit. The hardware of the ConsoleServer 3200 
may have been previously installed and is being upgraded at this time, or the system may be 
installed as brand new installation.  
 
Many hardware installation details are discussed in the ConsoleServer 3200 System Manual. 
Not all are repeated in this manual.  
4.1  Items in a SCS3230 Kit 
The SCS3230 'kit' includes all of the cards and cables required to upgrade a CS3200 to the 
SCS3230.  
 
PN 500.000.0010  - 10/100 BT SECURE 3230 CARD KIT 
 
includes: 
 - (1) 500.000.0014    --  10/100 BT CNTL/NTWK Card 
 - (4) 500.000.0012    --  3200 CHANNEL EXTENDER Card 
 - (4) 200.0161 
 -- CAT5 Cable, 24 inch long 
 
This SCS3230 guide, PN 15.00.038 is included with each PN 500.000.0014 card. 
 
Additional adapters and cables may also be included in the shipping container if ordered. 
Orders with a large number of cables and adapters are usually shipped in separate containers.  
 
If you are updating a CS3200 system, you may want to save your existing database from the 
CS3200 and copy it into the SCS3230.  To do so, you will use Backup to save the database, 
and then Restore to copy it into the SCS3230's memory.  
4:   Installation Instructions