Lightwave Communications SCS3230 Manuale Utente

A Lantronix Company  

 

SCS3230 System Administrator's Guide  

15.00.038

 

 - 59 - 

May 2002 

 

 
The 

ADDUSER command creates user IDs and assigns initial privileges.  The following 

screen will be displayed when the command is used: 
 

 
sys admin>>ADDUSER 
Number of available user records: 200 
Number of users defined: 0 
Enter user id | USER ID > 
 

 
Press 

<ENTER> after typing the user ID. The user name is not case-sensitive.  The next prompt 

asks for a password for the user ID.  When the user logs in for the first time he will be asked for 
this password.  This password is case-sensitive and is pre-expired.  The user must change the 
password before accessing any of the SCS3230 device ports.  The user password may be up to 
10 alphanumeric characters long, and may not contain the “

*” character.  The SCS3230 will 

echo only stars when the sys admin enters the password and confirmation 
 

 
Enter case sensitive password | PASSWORD > **** 
Re-enter case sensitive password | PASSWORD > **** 
0-17 | MAX CONCURRENT LOGINS: 1>17 
 

 

This parameter limits the number of simultaneous logins a user may have.  The sys 
admin may select between 0 and 17 concurrent logins.  A user with 0 logins will have 
connect and listen permissions defined, but cannot login to access anything until a 
number of logins greater than 0 is defined. 
 
 
 

 
Allowed devices example: 1-5,10 | DEVICES 0 > 1,5,7,8,30 
Allowed listen devices example: 1-5,10 | DEVICES 0 > 1-32 
 

 
The sys admin is now prompted to define the device ports that the user will be allowed 
to access for direct connections and listening connections.  If more than one port is to 
be allowed, then the individual ports must be separated by a comma.  A range of ports 
may be specified using the dash (“

-“). 

7:   Creating and Managing Users