Liebert Universal Monitor Manuale Utente

The Setup menu allows the user to configure the Universal Monitor—setting up inputs and outputs 

and an input/output matrix to trigger actions, the modem and pagers, and system features such as 

date and time. This menu also provides a vehicle for manually changing the state of an output to ON 

or OFF, clearing active alarms and deleting records from the Universal Monitor’s alarm log, event log 

and trend logs. 

After connecting to the Service Terminal Interface, the Main Menu appears, as shown below.

• Choose 0 to access the features illustrated in this section.

The System and Control options require a password to prevent unauthorized users from making 

changes to the system. After choosing 0 in the Main Menu above, the Login Menu appears:

• Enter the password, and the Setup Menu appears, as shown in the following section.

LIEBERT UNIVERSAL MONITOR

VX.XXX.X

LIEBERT CORPORATION COPYRIGHT 2003

ALL RIGHTS RESERVED

MAIN MENU

1=VIEW ACTIVE ALARMS
2=VIEW ALARM LOG
3=VIEW EVENT LOG
4=VIEW TREND LOG
5=VIEW INPUT & SENSOR STATUS
6=VIEW OUTPUT STATUS
7=VIEW PAGER NUMBERS
8=SILENCE ALARM
9=BACKUP LOG FILES
0=SETUP SYSTEM-LOGIN REQUIRED

SELECT A NUMBER:0

YOU MUST LOGIN TO PERFORM
SETUP OR TO MAKE CHANGES

LOGIN WITH 4 CHARACTER
PASSWORD

>****

>INVALID PASSWORD, ENTER AGAIN
>PRESS <ESC> TO EXIT

>