Legacy Car Audio CD Player LCD75DFX Manuale Utente
9
2
BASIC OPERATING OF FUNCTIONAL KEYS
1. OPEN BUTTON
Press the OPEN button to fold down the front control panel.
Then a CD can be inserted into the CD slot or ejected by pressing
the EJECT button.
Press the OPEN button to fold down the front control panel.
Then a CD can be inserted into the CD slot or ejected by pressing
the EJECT button.
2. RELEASE BUTTON
To remove the front control panel from the main body, poke at the
REL button downward to eject the front control panel.
To remove the front control panel from the main body, poke at the
REL button downward to eject the front control panel.
3. SEL BUTTON (Select) AND +/- BUTTONS
a) Press the SEL button briefly to select the mode of sound mode item by
item, such as VOLUME, BASS, TREBLE, BALANCE and FADER.
Now the settings of them can be adjusted by using the + and - button.
(Note: If equalizer settings such as POP and ROCK have been selected
under DSP, it is impossible to change to BASS and TREBLE.)
b) Press the SEL button and hold for more than 1 second to access the
menu mode. Now press the SEL button briefly to select the menu mode
as follows: DSP (OFF / POP M / ROCK M / CLASS M / FLAT M), BEEP
ON/OFF, SEEK 1/2, VOL LAST/ADJ.
DSP
In DSP mode you can select the equalizer settings POP M, ROCK M,
CLASS M and FLAT M, and DSP OFF by using the + and - button.
BEEP ON/OFF
You can select two types of confirmation beep by using the +/ - button.
BEEP ON: The confirmation beep can be heard whenever a button is
pressed.
BEEP OFF: The confirmation beep is switch off.
a) Press the SEL button briefly to select the mode of sound mode item by
item, such as VOLUME, BASS, TREBLE, BALANCE and FADER.
Now the settings of them can be adjusted by using the + and - button.
(Note: If equalizer settings such as POP and ROCK have been selected
under DSP, it is impossible to change to BASS and TREBLE.)
b) Press the SEL button and hold for more than 1 second to access the
menu mode. Now press the SEL button briefly to select the menu mode
as follows: DSP (OFF / POP M / ROCK M / CLASS M / FLAT M), BEEP
ON/OFF, SEEK 1/2, VOL LAST/ADJ.
DSP
In DSP mode you can select the equalizer settings POP M, ROCK M,
CLASS M and FLAT M, and DSP OFF by using the + and - button.
BEEP ON/OFF
You can select two types of confirmation beep by using the +/ - button.
BEEP ON: The confirmation beep can be heard whenever a button is
pressed.
BEEP OFF: The confirmation beep is switch off.
PRECAUTION OF DISC PLAY:
Cleaning the CD:
Before playing a CD, wipe it off with a clean, dust-free cleaning cloth.
Wipe the disc in the direction of the arrow.
Before playing a CD, wipe it off with a clean, dust-free cleaning cloth.
Wipe the disc in the direction of the arrow.
Always insert the CD with the label side facing upwards.
If the CD is inserted with the printed side facing downwards, the device
may be damaged.
If the CD is inserted with the printed side facing downwards, the device
may be damaged.
Note: If there is already a CD in the CD slot, do not try to insert a
second CD. For this may damage the device.
Always hold CDs by the edge. In order to keep the CD clean do not touch
the surface. Pull out the CD as the direction of follows.
second CD. For this may damage the device.
Always hold CDs by the edge. In order to keep the CD clean do not touch
the surface. Pull out the CD as the direction of follows.
Do not attach any sticker or adhesive tape on the CD.
Do not expose the CD to direct sunlight or sources of heat such as
heating pipes.
Do not leave CDs in a car if it parked in direct sunlight as that will lead to
a considerable rise in the temperature inside the car.
heating pipes.
Do not leave CDs in a car if it parked in direct sunlight as that will lead to
a considerable rise in the temperature inside the car.
Note: Do not use any solvents such as petrol or thinning agents.
Commercially available cleaning substances or antistatic spray will damage
the device.
Commercially available cleaning substances or antistatic spray will damage
the device.