Legacy Car Audio LCD69DSX Manuale Utente
3. SEL( AUDIO MODE SELECT)/VOLUME +/- BUTTON
Press SEL button to change the mode in the sequence of
VOL BAS TRE BAL FAD
Press SEL button to change the mode in the sequence of
VOL BAS TRE BAL FAD
a. The volume level can be adjusted at any time by pressing the audio level+ or
- button as select mode has been initially defaulted at volume mode.
b. The volume level is also obtained by stepping through the SEL button until
the function VOL is displayed and then press + or - button to adjust the
sound level.
c. Press and hold the + or - button to adjust the sound level.
- button as select mode has been initially defaulted at volume mode.
b. The volume level is also obtained by stepping through the SEL button until
the function VOL is displayed and then press + or - button to adjust the
sound level.
c. Press and hold the + or - button to adjust the sound level.
BASS CONTROL
a. Press the SEL button to select the bass mode until BAS appears on the display.
b. Press + or - to adjust the bass effect.
TREBLE CONTROL
a. Press the SEL button to select the treble mode until TRE appears on the display.
b. Press + or - to adjust the treble effect.
BALANCE CONTROL
a. Press the SEL button to select the balance mode until BAL appears on the display.
b. Press the + button or - button to increase or decrease the sound level of
b. Press the + button or - button to increase or decrease the sound level of
left or right speaker.
front or rear speaker.
FADER CONTROL
4. INFRA-RED RECEIVE WINDOW
5. LCD ( LIQUID CRYSTAL DISPLAY)
6. MUTE BUTTON
Press it to reduce the volume level temporarily.
Press it to reduce the volume level temporarily.
7. POWER BUTTON
Press the button to turn on or off the unit.
Press the button to turn on or off the unit.
8. OPEN(EJECT) BUTTON
Push it to slide the panel then you can insert or eject the disc from
the compartment.
Push it to slide the panel then you can insert or eject the disc from
the compartment.
a. Press the SEL button to select the fader mode until FAD appears on the display.
4
7
+
+
+
+
+
+
+
+
FUSED
FILTER
BOX
0.5A &7A
FUSES
FILTER
BOX
0.5A &7A
FUSES
YELLOW
ANTENNA PLUG
MEMORY B+
BLACK(GND)
RED (B+)
RCA LINE OUT
RED R
WHITE L
FRONT
REAR
RIGHT
SP
BLUE AUTO ANT
FRONT
WHITE
WHITE/BLACK
GREEN/BLACK
VIOLET/BLACK
GRAY/BLACK
GRAY
VIOLET
GREEN
REAR
LEFT
SP
Speaker Connection
12 P
NOTE: SOMETIMES THE DISC CANNOT BE LOADED
WHEN THE YOU CONNECT THE MEMORY WIRE AT THE
FIRST TIME AND THE DISC MARK WILL BE DISPLAYED
ON LCD. PLEASE PRESS RESET BUTTON AND RESTART
THE UNIT, THE UNIT WILL RESTORE TO NORMAL STATE.
WHEN THE YOU CONNECT THE MEMORY WIRE AT THE
FIRST TIME AND THE DISC MARK WILL BE DISPLAYED
ON LCD. PLEASE PRESS RESET BUTTON AND RESTART
THE UNIT, THE UNIT WILL RESTORE TO NORMAL STATE.
Note:
Make sure use a 4-ohms impedance speaker in spite of having any kinds
of speaker system. So that reduce the distortion during high volume level.
Make sure use a 4-ohms impedance speaker in spite of having any kinds
of speaker system. So that reduce the distortion during high volume level.